Step 01
Move the machining center tool (φ10mm or larger tool) onto the pushbar on the top of TOUCHDEX.
TOUCHDEX
- ABOUT TOUCHDEX
- FEATURES
- VARIETY OF TOUCHDEX
- TOUCHDEX PRODUCTS
- HOW TO SET
ABOUT TOUCHDEX
OPERATION OF TOUCHDEX
No cables, No servo motor, Just bolt on and index! TOUCHDEX is mounted on the machining center table in the same manner as a CNC index table for fully automatic indexing of the workpiece. In contrast to CNC index tables, the TOUCHDEX does not incorporate a servo motor, but uses the Z axis movement of the machining center to rotate the table for indexing.
Step 02
Using the Z axis movement of the machining center, press the pushbar with the tool.
Step 03
The table is clamped automatically when the pushbar is returned.
The indexing angle of the table is controlled by changing the Z axis movement.
When the table is rotated 45° with the pushbar full stroke, a movement of 5° is achieved by pushing the pushbar 5/45th of the stroke.
- ・The minimum indexing angle and maximum indexing angle at full stroke differs between models
- ・The feed rate on the Z axis when the pushbar is pressed is normally 1000mm per minute. However, The feed rate must be decreased when indexing unbalanced work.
Step 04
Recommence machining on the newly indexed face.
Feature 01
HEAVY MACHINING, HIGH-SPEED CUTTING BY STRONG CLAMPING FORCE
There is a feature of TOUCHDEX in its strong clamping force.
- The use of a locking pin to fix the workpiece provides a clamping force 2 to 3 times that of an ordinary index table, thus allowing heavy machining. Can be used for milling, end milling, drilling or tapping.
Feature 02
EASILY MOUNTED
TOUCHDEX can be mounted on a pallet changer, a horizontal machining center and so on.
- As a power control cable is not required, installation on the machine is simplified. Mounting the TOUCHDEX on a suitable machine at the right time, makes automatic indexing possible and creates a flexible production system.
Feature 03
MINIMUM SPACE REQUIRED
TOUCHDEX has no motorized parts
- ・Since it has no motorized parts, it can be installed in a minimum amount of space.
- ・Area required for installation is approximately half that of the normal index table.
- ・By lining up a two or more TOUCHDEX on the table, multiple surface of a plurality of workpieces can be machined simultaneously.
Feature 04
HIGH PRECISION AND SUPERIOR DURABILITY
High precision of TOUCHDEX favorably compares with NC indexer’s one.
- ・Indexing accuracy of less than 30 seconds (cumulative)
- ・Repeat accuracy ±3 seconds
- ・The unique clamping system ensures high accuracy despite locking pin wear, and with zero backlash for the life of the unit.
Feature 05
SIMPLY INDEXING
No tool-change for indexing
- ・Pushbar can be pushed with the tool which has a rigidity capable of pressing load (φ10mm or larger tool as a guide) though the tool is being used for machining.
- ・Tool change is not needed by pressing with collet holder or axis cover even when a fine tool is being used.
VIDEO
DEATAIL
FDR TYPE
Indxing and Rotation in Two Direction
- ・Push the right pushbar for indexing in the clockwise direction.
- ・Push the left pushbar for indexing and rotation in the anti-clockwise direction.
- ・Indexing of the workface in a shorter time.
- ・An unbalanced compensation mechanism provides for indexing of eccentric workpieces.
-360 TYPE
1 Degree Indexing
- ・This model allows a minimum indexing angle of 1deg.
- ・Ideal for workpieces of complex shape.
FDM TYPE
For Vertical or Horizontal Installation
- ・Simple machining of jigs and forming of chuck soft jaws while mounted on the TOUCHDEX.
- ・Mchining in diagonal direction is much simplified using the inclined table.
- ・Installation of each two (upper and lower) to the 4 sides of the tombstone of horizontal machining center allows machining of 40 faces in a single operation.
-04 TYPE
90 degrees Indexing Rotaton per Stroke
- ・Pressing the pushbar down once rotates the table by 90 degrees.
- ・Minimizes the indexing time required when machining square workpieces.
FD(M)K TYPE
Brake Ring Function
- ・This function suppresses a decrease in clamping force during indexing by continuously applying a constant friction force to the table.
- ・It can respond to more unbalanced workpieces/jigs.
TILTING TL TYPE
Five-face Machining
- ・Integrates two units for five-face machining on vertical machining centers.
VISEDEX FDV TYPE
Three-face Machining of Multiple Workpieces
- ・Fit end support, base, and machining chuck (FDV-164) to FD-200 or FD-300 for three-face machining of multiple workpieces in a single operation.
TOUCHDEX PRODUCTS
-
EXTRA LOW PROFILE/ LIGHT WEIGHT FD-105
Compact design Table diameter : :φ105mm, Weight : 4.5kg
Small workpiece machining : Multiple units can be mounted on a small machining center.
-
FD, FDM TYPE
Table diameter less than Φ210
FD type : For Vertical Installation
FDM type : For Vertical and Horizontal Installation
-
FD, FDM TYPE
Table diameter over Φ230
FD type : For Vertical Installation
FDM type : For Vertical and Horizontal Installation
-
FDR TYPE
Indexing and Rotation in Two Directions
-
FDMK TYPE
Standard equipment with a brake ring function in addition to FDM type.
-
TILTING UNIT TL TYPE
Integrates two TOUCHDEXES for five machinig on vertical machining center.
-
VISEDEX FDV TYPE
Fit end support and base to FD-200 or FD-300 for three-face machining of multiple workpieces in a single operation.
-
TOUCHDEX OPTION
MANUAL HANDLE
TAILSTOCK
END SUPPORT
SCROLL CHUCK
GUIDE BLOCK -
SUB TURRET TD-104
45 degrees indexing rotation at two times of full push
Maximum 4 pieces of cutting Tools are installed. -
SUB TURRET TD-170-8
45 degrees indexing rotation at a full push
Maximum 8 pieces of cutting Tools are installed.
SETTINGS
