PRODUCTS INFORMATION
-
VH SERIES2 JAW INDEX CHUCK FOR SMALL VALVE
Tighten a workpiece manually
MORE
Indexing angle : 45 degrees
One-touch indexing is enabled while chucking a workpiece. -
VL SERIES2 JAWS INDEX CHUCK FOR LARGE VALVE
Tighten a workpiece manually
MORE
Indexing angle : 45 degrees
One-touch indexing is enabled while chucking a workpiece. -
VA SERIES2 JAWS INDEX POWER CHUCK FOR SMALL VALVE
Tighten a workpiece to the spindle from the rear side by a hydraulic cylinder.
MORE
Rotate the indexing handle
Direct mounting
Indexing angle : 45 degrees -
VX SERIES2 JAWS INDEX POWER CHUCK FOR LARGE VALVE
Tighten a workpiece to the spindle from the rear side by a hydraulic cylinder.
MORE
Rotate the indexing handle
Direct mounting
Indexing angle : 45 degrees -
CENTER DRILL MACHINECENTER DRILL MACHINE
Center drill machining for the diameter 15mm ~300mm is easily can be performed.
MORE -
FBK/FBJ SERIESFACE PLATE WITH BORING MILL JAWS FBK/FBJ SERIES
Cast iron body
MORE
Chuck upper surface has T-slots or Tap holes.
Boring mill jaw is 1-piece type or 2-piece type.
Chuck size (Φ1000~Φ2000) -
WY SERIESWELDING POSITIONER CHUCK FOR LARGE
Chuck size(Φ200~Φ400)
MORE
3 jaws scroll chuck for the use on the welding positioners
-
WPS SERIESWELDING POSITIONER CHUCK
Chuck size(Φ500~Φ1200)
MORE
3 jaws scroll chuck for the use on the welding positioners
-
WP SERIESWELDING POSITIONER CHUCK
Chuck size(Φ200~Φ400)
MORE
3 jaws scroll chuck for the use on the welding positioners
-
PC SERIESAUTOMATIC OPERATED PIPE CATCHER PC SERIES
Automation of chucking for turning, welding, jig etc.
MORE -
CVH SERIES3/6 JAWS POWER CHUCK FOR LARGE
Cast iron body
MORE
Chuck size (Φ700~Φ1600)
For adopter mounting (Optional)
-
CV SERIES3 JAWS POWER CHUCK
Cast iron body
MORE
Chuck size 21"~24" (Φ530~Φ610)
For direct mounting on Type A spindle nose
-
CVA SERIES4 JAWS COMBINATION CHUCK
Cast iron body
MORE
With chip covers
This chuck is equipped with four jaws with a adjustment mechanism. -
4HA SERIES4 JAWS (2+2) POWER CHUCK
Cast iron
MORE
Chuck size (Φ460~Φ2000)
One chuck can hold workpieces of various shapes due to the two opposing sets of jaws which move independently towards center.
-
FLC/FCH SERIES6 JAWS FLOATING CHUCK
Floating function optimal for ring machining included
MORE
FLC series : Centrifugal force compensation
-
NHR SERIES3 JAWS POWER CHUCK WITH LARGE THRU HOLE
Optimal for short length shaft machining
MORE
With extra large bore through hole
-
ASM SERIES3 JAWS STATIONARY CHUCK
Equipped with a built-in air cylinder
MORE
Optimal for machining of flange with vertical machining center
Low profile -
POWER WRENCH3 JAWS POWERWRENCH CHUCK & POWER WRENCH
Cast iron body
MORE
It becomes possible for the chuck jaws to be moved not manually, but by a hydraulic power wrench.
-
CLK SERIES3 JAWS POWER CHUCK, LONG STROKE JAW
【Long Jaw Stroke type】
MORE
Jaw stroke total 50mm (DIA)
Chuck size (Φ800~Φ1600)
For adaptor mounting
With chip covers for vertical use
-
CVB SERIESPOWER CHUCK FOR LARGE, WITH BORING MILL JAWS CVB SERIES
Cast iron body
MORE
Chuck size (Φ1000~Φ2000)
Jaw stroke : 30mm (DIA)
CVB-1P: Boring mill jaws are 1-piece type
CVB-2P: Boring mill jaws are 2-piece type -
46 SERIES4 JAWS INDEPENDENT CHUCK FOR ADAPTOR MOUNTING
Cast iron body
MORE
Chuck size 12"~32" (Φ300~Φ810)
For adapter mounting
-
41/42 SERIES4 JAW INDEPENDENT CHUCK FOR DIRECT MOUNTING
Cast iron body
MORE
Chuck size 12"~32" (Φ300~Φ810)
For adapter mounting
-
44 SERIES4 JAWS INDEPENDENT CHUCK LARGE-SIZED TYPE
Cast iron body
MORE
Chuck size 12"~24"(Φ300~Φ600)
For direct mounting on Type A spindle noses
-
NST SERIES3 JAWS SCROLL CHUCK
Cast iron body
MORE
Chuck size 5"~24"(Φ132~Φ610)
For adaptor mounting
2 piece tongue and groove jaws
One each set of Soft jaws and hard top jaws are included.
-
41/42 SERIES4 JAWS INDEPENDENT CHUCK HEAVY DUTY TYPE
Steel body
MORE
Chuck size 18"~"42(Φ457~Φ1067)
For direct mounting on Type A spindle noses
-
IDK/IDV SERIES4 JAWS INDEPENDENT CHUCK WITH COVER
Cast iron body
MORE
Chuck size 18"~"71(Φ450~Φ1800)
With chip cover
-
31/32 SERIES3 JAWS SCROLL CHUCK HEAVY DUTY TYPE
Steel body
MORE
Chuck size 18"~"42 (Φ457~Φ1067)
For direct mounting on Type A spindle noses
-
SRK/SRV SERIES3/6 JAWS SCROLL CHUCK WITH COVER
~Φ710 : Steel body Φ800~ : Cast iron body
MORE
Chuck size 21"~71"(Φ535~Φ1800)
With chip cover
-
TI SERIESLOW PROFILE INDEPENDENT CHUCK TI SERIES
For installation on a tombstone, machining center table, or 5-axis machine table
MORE
Low profile and lightweight
With chip cover
Chuck size 12"~39"(Φ300~Φ1000) -
TM SERIES3/4/6 JAWS SCROLL CHUCK LOW PROFILE LIGHT WEIGHT TYPE
For installation on a tombstone, machining center table, or 5-axis machine table
MORE
Low profile and lightweight
With chip cover
Chuck size 12"~39"(Φ300~Φ1000)
-
FBK/FBJ SERIESINDEPENDENT CHUCK WITH BORING MILL JAWS FBK/FBJ SERIES
Cast iron body
MORE
Chuck upper surface has T-slots or Tap holes.
Boring mill jaw is 1-piece type or 2-piece type.
Chuck size (Φ1000~Φ2000) -
PH SERIES5 JAWS SCROLL CHUCK WITH LARGE THRU HOLE FOR PIPE MACHINING
Cast iron body
MORE
Chuck bore Φ175~Φ420
Solid jaw type or 2-piece jaws type are available -
HS SERIESCOMPACT SIZED HYDRAULIC CYLINDER
Applicable for CVH, CVA, CLK series
MORE
Compact form is suitable for use on vertical lathe